Beyond Purdue No. 068 / Data diodes
The drawing and the box
The passive data diode drawn port by port, and the real module it describes.

We redrew the optical path of the passive data diode and photographed the real module. Both are now on the diode page.
The drawing

The OT switch sends light from its TX port into a 1 × 2 splitter. Ten percent goes back to the switch's own RX port, so the OT link stays up and the switch sees a normal connection. Ninety percent goes through a fusion splice into an optical isolator, and on to the RX port of the IT switch.
The TX port of the IT switch is not used. It has a dust plug in it.
Light sent back from the IT side stops at the isolator. The fibre on either side carries light in both directions. The isolator is what makes the path one way.
The box

PDD1 is a sealed box, 100 × 80 × 10 mm, with three 0.3 m leads. No power socket, no port to log into, no firmware.

The leads carry the same names as the drawing: A-TX, A-RX and B-RX. Whoever fits it connects three labelled leads to two ordinary SFP ports, and nothing else.
Why so simple
Plant data goes out to the office. Nothing comes back in through the same path. The protection systems stay where they are, hardwired, and the diode does not touch them.
The full drawing, the datasheet, and the history from Faraday in 1845 to Rayleigh in 1885 are on the diode page.


